8.0

Included Effect Plug-ins
Reverb Plug-ins
110
Shape
Controls the attack of the reverb tail. At a setting of 0 %, the attack is more
immediate, which is a good setting for drums. The higher this value, the less
immediate the attack.
Density
Adjusts the echo density of the reverb tail. At a setting of 100 %, single
reflections from walls cannot be heard. The lower this value, the more single
reflections can be heard.
High Cut
Attenuates the high frequencies of the reverb tail. The lower this value, the
less high frequencies the reverb tail will have.
Width
Adjusts the output of the reverb signal between mono and stereo. At a setting
of 0
%, the output of the reverb is mono, at 100 % it is stereo.
Mix
Sets the level balance between the dry signal and the wet signal. If the effect
is used as a send effect, set this parameter to the maximum value as you can
control the dry/effect balance with the send.
Lock
Activate this button (padlock symbol) next to the Mix parameter to lock the
dry/wet balance while browsing through the available presets.
Modulation
Modulation allows you to enrich the reverb tail through subtle pitch modulations.
Modulation Enable
Activates/Deactivates the chorusing effect.
Modulation Rate
Specifies the frequency of the pitch modulation.
Modulation Depth
Sets the intensity of the pitch modulation.
REVerence
REVerence is a convolution tool that allows you to apply room characteristics
(reverb) to the audio.
Cubase
LE
Cubase
AI
Cubase
Elements
Cubase
Artist
Cubase
Pro
Nuendo NEK
Included with ––––XX–