8.0

Included Effect Plug-ins
Reverb Plug-ins
109
Size
Adjusts the length of the early reflections pattern. At a setting of 100 %, the
pattern is applied with its original length and the room sounds the most
natural. At settings below 100
%, the early reflections pattern is compressed
and the room is perceived smaller.
Low Cut
Attenuates the low frequencies of the early reflections. The higher this value,
the less low frequencies are present in the early reflections.
High Cut
Attenuates the high frequencies of the early reflections. The lower this value,
the less high frequencies the early reflections will have.
Delay
Delays the onset of the reverb tail.
Room Size
Controls the dimensions of the simulated room. At a setting of 100 %, the
dimensions correspond to a cathedral or a large concert hall. At a setting of
50
%, the dimensions correspond to a medium-sized room or studio. Settings
below 50
% simulate the dimensions of small rooms or a booth.
Main Time
Controls the overall reverb time of the tail. The higher this value, the longer the
reverb tail will decay. At a setting of 100
%, the reverb time is infinitely long.
The Main Time parameter also represents the mid band of the reverb tail.
High Time
Controls the reverb time for the high frequencies of the reverb tail. With
positive values, the decay time of the high frequencies is longer. With negative
values, it is shorter. Frequencies are affected depending on the High Freq
parameter.
Low Time
Controls the reverb time for the low frequencies of the reverb tail. For positive
values, low frequencies decay longer and vice versa. Frequencies will be
affected depending on the Low Freq parameter.
High Freq
Sets the cross-over frequency between the mid and the high band of the
reverb tail. You can offset the reverb time for frequencies above this value
from the main reverb time with the High Time parameter.
Low Freq
Sets the cross-over frequency between the low and the mid band of the
reverb tail. The reverb time for frequencies below this value can be offset from
the main reverb time with the Low Time parameter.