8.0

Included Effect Plug-ins
Reverb Plug-ins
108
The early reflections are responsible for the spatial impression in the first
milliseconds of the reverb. For emulating different rooms, you can choose between
different early reflections patterns and adjust their size. The reverb tail, or late
reverberation, offers parameters for controlling the room size and the reverb time.
You can adjust the reverb time individually in 3 frequency bands.
Pre-Delay
Determines how much time passes before the reverb is applied. This allows
you to simulate larger rooms by increasing the time it takes for the first
reflections to reach the listener.
Early Reflections
Here, you select an early reflections pattern. The early reflections pattern
contains the most important delays that deliver the key information for the
spatial impression of the room.
ER/Tail Mix
Sets the level balance between the early reflections and the reverb tail. At a
setting of 50
%, early reflections and tail have the same volume. Settings
below 50
% raise the early reflections and lower the tail, as a result the sound
source moves towards the front of the room. Settings above 50
% raise the
tail and lower the early reflections, as a result the sound source moves
towards the back of the room.