6.0

327
ReWire (not in Cubase LE)
How the ReWire channels are
handled in Cubase
When you activate ReWire channels in the ReWire De-
vice panels, they will become available as channel strips in
the Mixer. The ReWire channel strips have the following
properties:
• ReWire channels appear to the right of the other audio
and MIDI channel strips in the Mixer.
• ReWire channels may be any combination of mono and
stereo, depending on the synthesizer application.
• ReWire channels have the same functionality as regular
audio channels.
This means you can set volume and pan, add EQ, insert effects and sends,
and route the channel outputs to groups or busses. However, ReWire
channels have no monitor buttons.
• All ReWire channel settings can be automated using
the Read/Write buttons.
When you write automation, channel automation tracks will automatically
appear in the Project window. This allows you to view and edit the auto
-
mation graphically, just as with VST instrument channels, etc.
• You can mix down the audio from ReWire channels to a
file on your hard disk with the Export Audio Mixdown func-
tion (see “Mixing down to audio files” on page 297).
You can export the output bus to which you have routed the ReWire
channels. You can also export individual ReWire channels directly –
“rendering” each ReWire channel to a separate audio file.
Routing MIDI via ReWire2
When using Cubase with a ReWire2-compatible appli-
cation, additional MIDI outputs will automatically appear
on the MIDI Output pop-up menus for MIDI tracks. This
allows you to play the synthesizer application via MIDI
from Cubase, using it as one or several separate MIDI
sound sources.
The MIDI outputs for a Reason song. Here, each output goes directly to
a device in the Reason rack.
• The number and configuration of MIDI outputs depends
on the synthesizer application.
Considerations and limitations
Sample rates
Synthesizer applications may be limited to audio playback
in certain sample rates. If Cubase is set to a sample rate
other than those, the synthesizer application will play back
at the wrong pitch. Consult the documentation of the syn
-
thesizer application for details.
ASIO drivers
ReWire works well with ASIO drivers. By using the Cu-
base bus system you can route sounds from the synthe-
sizer application to various outputs on an ASIO compati-
ble audio card.
!
This feature is only available with ReWire2-compati-
ble applications.