5.0

79
The mixer
• In the Inspector (Equalizers tab) and in the Channel
Settings window, click the Bypass button (next to the EQ
button) so that it turns yellow.
Click again to deactivate EQ Bypass mode.
EQ bypass in the mixer, the Channel Settings window and the Inspector
EQ reset
On the Presets pop-up menu in the Channel Settings win-
dow and in the Inspector, you will find the Reset command.
Select this to turn off all EQ modules and reset all EQ pa-
rameters to their default values.
Using EQ presets
Some useful basic presets are included with the program.
You can use them as they are, or as a starting point for fur-
ther “tweaking”.
• To call up a preset, pull down the presets pop-up menu
in the Channel Settings window or in the Inspector and
select one of the available presets.
• To store the current EQ settings as a preset, select
“Store Preset” on the presets pop-up menu and enter the
desired name for the preset in the dialog that appears.
• To rename the selected preset, select “Rename Preset”
on the pop-up menu and enter a new name.
• To delete the selected preset, select “Remove Preset”
on the pop-up menu.
Ö You can also apply EQ (and Inserts) settings from
Track presets, see “Applying Inserts and EQ settings from
track presets” on page 158.
EQ in the channel overview
If the “Channel” section is selected in the Inspector, you
will get an overview of which EQ modules, insert effects
and sends are activated for the channel.
By clicking the respective indicator (1 to 4), you can turn
the corresponding EQ module on or off.
The channel overview in the Inspector
Copying settings between audio channels
It is possible to copy all channel settings for an audio chan-
nel and paste them to one or several other channels. This
applies to all audio-based channel types. For example, you
can copy EQ settings from an audio track and apply these
to a group or VST Instrument channel, if you want them to
have the same sound.
Proceed as follows:
1. In the mixer, select the channel you want to copy set-
tings from.
2. Click the “Copy First Selected Channel’s Settings”
button on the common panel.
3. Select the channel(s) you want to copy the settings to
and click the “Paste Settings to Selected Channels” button
(below the “Copy First Selected Channel Settings” button).
The settings are applied to the selected channel(s).
You can copy channel settings between different types of
channels, but only those channels will be used for which
corresponding settings are available in the target channel:
• For example, since output channels do not have send effects,
copying from them will leave the Sends settings in the target
channel unaffected.