5.0

20
The Project window
The toolbar
The toolbar contains tools and shortcuts for opening other
windows and various project settings and functions:
Ö In addition to these, the toolbar can contain a number
of other tools and shortcuts, not visible by default. How to
set up the toolbar and specify which tools should be dis-
played or hidden is described in the section “Using the
Setup options” on page 262.
The info line
The info line shows information about the currently selected
event or part in the Project window. You can edit almost all
values on the info line using regular value editing. Length
and position values are displayed in the format currently se-
lected for the ruler (see “The ruler” on page 21).
• To hide or show the info line, click the Show Event Info
Line button on the toolbar.
The following elements can be selected for display and
editing on the info line:
• Audio events
•Audio parts
• MIDI parts
• Video events
•Markers
• Automation curve points
When several elements are selected
• If you have several elements selected, the info line will
show information about the first item in the selection. The
values will be shown in yellow to indicate that several ele-
ments are selected.
• If you edit a value on the info line, the value change is
applied to all selected elements, relatively to the current
values.
If you have two audio events selected and the first is one bar long and
the other two bars long, the info line shows the length of the first event
(one bar). If you now edit this value to 3 bars in the info line, the other
event will be resized by the same amount – and will thus be 4 bars long.
• If you press [Ctrl]/[Command] and edit on the info line,
the values will be absolute instead. In our example above,
both events would be resized to 3 bars. Note that [Ctrl]/
[Command] is the default modifier key for this – you can
change this in the Preferences (Editing–Tool Modifiers
page, under the Info Line category).
Editing Transpose and Velocity for MIDI parts
When one or several MIDI parts are selected, the info line
contains Transpose and Velocity fields.
• Adjusting the Transpose field transposes the selected
parts in semitone steps.
Note that this transposition doesn’t change the actual notes in the part –
it’s just a “play parameter”, affecting the notes on playback. The transpo-
sition you specify for a part on the info line is added to the transposition
set for the whole track.
• Adjusting the Velocity field shifts the velocity for the se-
lected parts – the value you specify is added to the veloc-
ities of the notes in the parts.
Again, this velocity shift only affects the notes on playback, and again,
the value you specify is added to the Vel.Shift. value set for the whole
MIDI track in the Inspector.
Active project
indicator
Show/hide Inspector
Show/hide info line
Open Mixer
Open Pool
Constrain delay compensation (see “Constrain Delay Compensation”
on page 106).
Project window tools
Transport controls
(Previous/Next Marker, Cycle, Stop, Play, and Record)
Snap on/off
Snap mode
Grid pop-up
menu
Quantize
value
Color pop-up
menu
Snap to Zero
Crossing
Autoscroll and Suspend
Autoscroll when Editing