12.0
Table Of Contents
percentage causes high frequencies to decay quicker. Values above 100 % cause high
frequencies to decay more slowly than the mid-range frequencies.
Mix
Sets the level balance between the dry signal and the wet signal. When using
RoomWorks SE inserted in an FX channel, you most likely want to set this to 100 %.
Spatial + Panner Plug-ins
MonoToStereo
MonoToStereo turns a mono signal into a pseudo-stereo signal. The plug-in can be used on
mono audio or on stereo audio with equal channels.
Delay
Increases the amount of differences between the left and right channels to further
increase the stereo effect.
Width
Controls the width or depth of the stereo enhancement. Turn clockwise to increase the
enhancement.
Mono
Sets the output to mono. This allows you to check for unwanted coloring of the sound
which can occur when creating an articial stereo image.
Color
Generates additional differences between the channels to increase the stereo
enhancement.
Tools Plug-ins
Tuner
This is a guitar tuner.
To tune your instrument, connect it to an audio input, select Tuner as an insert effect, and
activate
Monitor for the corresponding track. Click Mute if you want to mute the output while
tuning your instrument.
NOTE
Make sure that you deactivate any other effect that alters the pitch, such as a chorus or vibrato.
Included VST Audio Effect Plug-ins
Spatial + Panner Plug-ins
32
Cubase AI 12.0.0