12.0

RingModulator
RingModulator can produce complex, bell-like enharmonic sounds.
Ring modulators work by multiplying two audio signals. The ring-modulated output contains
added frequencies generated by the sum of, and the difference between, the frequencies of the
two signals.
RingModulator has a built-in oscillator that is multiplied with the input signal to produce the
effect.
Oscillator
Waveform buttons
Allow you to select the oscillator waveform: square, sine, saw, or triangle.
LFO Amount
Controls how much the LFO affects the oscillator frequency.
Env. Amount
Controls how much the oscillator frequency is affected by the envelope that is
triggered by the input signal. Left of center, a loud input signal decreases the oscillator
pitch, whereas right of center the oscillator pitch increases if it is fed a loud input.
Frequency
Sets the oscillator frequency ± 2 octaves within the selected range.
Roll-Off
Attenuates high frequencies in the oscillator waveform to soften the overall sound.
This is best used with harmonically rich waveforms, for example, square or saw.
Range
Determines the frequency range of the oscillator in Hz.
LFO
Waveform buttons
Allow you to select the LFO waveform: square, sine, saw, or triangle.
Speed
Sets the LFO speed.
Included VST Audio Effect Plug-ins
Modulation Plug-ins
27
Cubase AI 12.0.0