12.0

Metalizer
Metalizer feeds the audio signal through a variable frequency lter, with tempo sync or time
modulation and feedback control.
Mix
Sets the level balance between the dry signal and the wet signal. If the effect is used
as a send effect, set this parameter to the maximum value, as you can control the
dry/effect balance with the send level.
On/Off
Activates/Deactivates lter modulation. If it is deactivated, Metalizer works as a static
lter.
Speed
If tempo sync is activated, this is where you specify the base note value for
synchronizing the effect to the tempo of the host application (1/1 to 1/32, straight,
triplet, or dotted).
If tempo sync is deactivated, the modulation speed can be set freely with the Speed
control.
Sync
Activates/Deactivates tempo sync.
Mono
Switches the output to mono.
Feedback
Determines the character of the metal effect. Higher settings produce a more metallic
sound.
Sharpness
Sets the character of the lter effect. The higher the value, the narrower the affected
frequency area, which produces a sharper sound and a more pronounced effect.
Tone
Sets the feedback frequency. The effect of this is more noticeable with high Feedback
settings.
Included VST Audio Effect Plug-ins
Modulation Plug-ins
25
Cubase AI 12.0.0