12.0

You can independently specify the frequency, width, and gain for the Low and High Pedal
positions. The crossover point between the Lo and Hi Pedal positions lies at 50.
WahWah Parameters
Pedal
Controls the lter frequency sweep.
Pedal Control (MIDI)
Allows you to choose the MIDI controller that controls the plug-in. Set this to
Automation if you do not want to use MIDI realtime control.
Freq Low/Freq High
Set the frequency of the lter for the Lo and Hi pedal positions.
Width Low/Width High
Set the width (resonance) of the lter for the Lo and Hi pedal positions.
Gain Low/Gain High
Set the gain of the lter for the Lo and Hi pedal positions.
Filter Slope selector
Allows you to choose between two lter slope values: 6 dB or 12 dB.
MIDI Control
For realtime MIDI control of the Pedal parameter, MIDI must be directed to the WahWah plug-
in.
If WahWah is used as an insert effect (for an audio track or an FX channel), it is available on the
Output Routing pop-up menu for MIDI tracks.
If WahWah is selected on the Output Routing menu, MIDI data is directed to the plug-in from
the selected track.
Modulation Plug-ins
AutoPan
This auto-pan effect provides several parameters to modulate the left/right stereo position. You
can use presets or create individual curves for the modulation waveform. AutoPan also allows
for chopping effects by linking the modulation of left and right channel.
NOTE
The panning effect of this plug-in works only on stereo tracks.
Included VST Audio Effect Plug-ins
Modulation Plug-ins
20
Cubase AI 12.0.0