12.0

● In Note Off mode, the gate remains open for as long as the MIDI note plays.

The Hold and Release parameters are applied once a note-off signal has been

received.

Setting Up MidiGate

To use MidiGate for your audio, you need an audio track and a MIDI track.

PROCEDURE

1. Select the audio track to which you want to apply MidiGate.

This can be recorded or realtime audio material from any audio track.

Select MidiGate as an insert effect for the audio track.

Select a MIDI track to control the MidiGate effect.

You can either play notes on a connected MIDI keyboard or use recorded MIDI notes.

Open the Output Routing pop-up menu for the MIDI track and select MidiGate.

Applying MidiGate

PREREQUISITE

Set up the plug-in properly.

How to apply MidiGate depends on whether you are using realtime or recorded MIDI. We

assume for the purposes of this manual that you are using recorded audio and play the MIDI in

realtime.

PROCEDURE

1. If you use realtime MIDI to trigger the plug-in, make sure the MIDI track is selected.

2. Start playback.

3. If you use realtime MIDI, play a few notes on your keyboard.

RESULT

The MIDI notes trigger the Gate. The plug-in gates the audio signals.