11.0

Octave 1
Adjusts the level of the generated signal one octave below the original pitch. A setting
of 0 means that the voice is muted.
Octave 2
Adjusts the level of the generated signal two octaves below the original pitch. A setting
of 0 means that the voice is muted.
Reverb Plug-ins
RoomWorks SE
RoomWorks SE is a smaller version of the RoomWorks plug-in. RoomWorks SE delivers high
quality reverberation, but has fewer parameters and is less CPU demanding than the full version.
Pre-Delay
Determines how much time passes before the reverb is applied. This allows you to
simulate larger rooms by increasing the time it takes for the rst reections to reach
the listener.
Reverb Time
Allows you to set the reverb time in seconds.
Diffusion
Affects the character of the reverb tail. Higher values lead to more diffusion and a
smoother sound, while lower values lead to a clearer sound.
Low Level
Affects the decay time of the low frequencies. Normal room reverb decays quicker in
the high- and low-frequency range than in the mid-range. Lowering the level
percentage causes low frequencies to decay quicker. Values above 100 % cause low
frequencies to decay more slowly than the mid-range frequencies.
High Level
Affects the decay time of the high frequencies. Normal room reverb decays quicker in
the high- and low-frequency range than in the mid-range. Lowering the level
percentage causes high frequencies to decay quicker. Values above 100 % cause high
frequencies to decay more slowly than the mid-range frequencies.
Mix
Sets the level balance between the dry signal and the wet signal. When using
RoomWorks SE inserted in an FX channel, you most likely want to set this to 100 %.
Included Effect Plug-ins
Reverb Plug-ins
31
Cubase AI 11.0.0