Plug-in Reference

99
The Included Effect Plug-ins
Spatial + Panner Plug-ins
Ö By pressing [Shift] while using the controls, you can fine-adjust all parameters.
Individual Channel Adjustment
You can change the positions of the input channels individually by double-clicking the
corresponding input icon in the stage view. A separate panel with channel-specific
parameters opens.
The following options are available:
Rotation Rotates the input group around its center point.
Link Angle &
Rotation
Changes the rotation of the input group from self-centered to
stage-centered.
Depth Scales the input group vertically.
Width Scales the input group horizontally.
Link Depth & Width Keeps the aspect ratio between Depth and Width scaling.
Option Description
Option Description
Radius/Angle Control the position of the selected input channel, relative to the
center of the input group.
X/Y Move the selected input channel horizontally and vertically.
Volume Applies gain to the selected input channel.
LFE Volume Controls the amount of LFE for the selected input channel.
Spread Distributes the audio from the selected input channel to more than
two output channels.
At 0 % the audio source is rendered where the channel icon is
placed.
At 100 % the audio is evenly distributed to all speakers of the output
configuration.
Manual Delay Adds a delay to the selected input channel.
Link buttons Activate these buttons to link the corresponding parameters in the
current plug-in instance. Adjusting the value of a linked parameter
changes the other linked parameters, too.
!
The individual input channel parameters cannot be automated from the host
application, but the adjustments you make for each input channel are saved for each
plug-in instance and panner in the session.