Plug-in Reference

Table Of Contents

The Included Effect Plug-ins

Spatial + Panner Plug-ins

This section contains descriptions of the plug-ins in the “Spatial + Panner” category.

Anymix Pro

The Anymix Pro plug-in from IOSONO is a sophisticated surround panner and a

powerful upmix/fold down processor that converts any given audio material into

output formats ranging from mono to 8.1.

Input/Output Configuration

The input/output configuration of the plug-in can be selected from the In and Out

pop-up menus in the top left corner of the plug-in panel.

If Anymix Pro is used as an insert effect, the maximum input and output configuration

cannot exceed the track width of the current track.

If Anymix Pro is used as a panner, the maximum input configuration cannot exceed the

track width of the current track. The maximum output configuration cannot exceed the

width of the output bus that the track is currently routed to.

Diffusion Affects the character of the reverb tail. Higher values lead to more

diffusion and a smoother sound, while lower values lead to a clearer

sound.

Hi Level Affects the decay time of high frequencies. Normal room reverb

decays quicker in the high- and low-frequency range than in the mid-

range. Lowering the level percentage causes high frequencies to

decay quicker. Values above 100

% cause high frequencies to decay

more slowly than the mid-range frequencies.

Lo Level Affects the decay time of low frequencies. Normal room reverb

decays quicker in the high- and low-frequency range than in the mid-

range. Lowering the level percentage causes low frequencies to

decay quicker. Values above 100

% cause low frequencies to decay

more slowly than the mid-range frequencies.

Mix Determines the balance of dry (unprocessed) and wet (processed)

signal. When using RoomWorks SE inserted in an FX channel, you

most likely want to set this to 100

% or use the wet only button.

Parameter Description

Cubase

Elements

Cubase

Artist

Cubase Nuendo NEK

Included with

– – – – – X –