Plug-in Reference

71
The Included Effect Plug-ins
Modulation Plug-ins
Flanger
Flanger is a classic flanger effect with added stereo enhancement.
The following parameters are available:
Delay – Humanize Controls the amount of delay variation when Static Delay is
deactivated. With Humanize, the delay is constantly modulated for a
more natural effect. The value range is from 0 to 100 (strongest delay
variation).
Static Delay button Use this button to activate/deactivate the Static Delay function. If
activated, the set delay amount is static, and the Humanize knob is
grayed out.
Parameter Description
Cubase
LE
Cubase
AI
Cubase
Elements
Cubase
Artist
Cubase Nuendo NEK
Included with
X X X X X X –
Side-chain
support
– – – X X X –
Parameter Description
Rate If tempo sync is on, this is where you specify the base note value for
tempo-syncing the flanger sweep (1/1 to 1/32, straight, triplet, or
dotted).
If tempo sync is off, the sweep rate can be set freely with the Rate
knob.
Sync button The button below the Rate knob switches tempo sync on or off.
Range Lo/Hi Set the frequency boundaries for the flanger sweep.
Feedback Determines the character of the flanger effect. Higher settings
produce a more metallic sounding sweep.
Spatial Sets the stereo width of the effect. Turn clockwise for a wider stereo
effect.
Mix Sets the level balance between the dry and the wet signal. If Flanger
is used as a send effect, set this to the maximum value as you can
control the dry/effect balance with the send.
Waveform Shape
selector
Allows you to select the modulation waveform, altering the character
of the flanger sweep. A sine and a triangle waveform are available.
Delay Affects the frequency range of the modulation sweep by adjusting the
initial delay time.