Plug-in Reference

7
The Included Effect Plug-ins
Delay Plug-ins
MonoDelay
This is a mono delay effect that can either be tempo-based or use freely specified
delay time settings.
The following parameters are available:
Spatial Introduces an offset between the channels to create a stereo
panorama effect for the filter frequency modulation. Turn clockwise
for a more pronounced stereo effect.
Q-Factor Sets the resonance of the filter. It is only available if filter resonance
LFO tempo sync is deactivated and the Speed parameter is set to 0.
When using tempo sync, the resonance is controlled by the Speed
and Range parameters.
Speed Sets the speed of the filter resonance LFO modulation. When using
tempo sync, the Speed parameter sets the base note value for
tempo syncing the modulation (1/1 to 1/32, straight, triplet, or
dotted). If tempo sync is off, the speed can be set freely.
Speed –
Sync button
The button below the Speed knob switches tempo sync for the
Speed parameter on or off.
Range Lo/Hi These knobs specify the range of the filter resonance modulation.
Both positive (for example, Lo set to 50 and Hi set to 100) and
negative (for example, Lo set to 100 and Hi set to 50) ranges can
be set. If tempo sync is off and the Speed is set to zero, these
parameters are inactive and the filter resonance is controlled by the
Q-Factor parameter instead.
Spatial Introduces an offset between the channels to create a stereo
panorama effect for the filter resonance modulation. Turn
clockwise for a more pronounced stereo effect.
Parameter Description
Cubase
LE
Cubase
AI
Cubase
Elements
Cubase
Artist
Cubase Nuendo NEK
Included with
X X X X X X –
Side-chain
support
– – – X X X –
Parameter Description
Delay If tempo sync is on, this is where you specify the base note value for
the delay (1/1 to 1/32, straight, triplet, or dotted).
If tempo sync is off, the delay time can be set freely in milliseconds.
Sync button The button below the Delay knob switches tempo sync on or off.
Feedback Sets the number of repeats for the delay.