Plug-in Reference

68
The Included Effect Plug-ins
Modulation Plug-ins
Chopper
Chopper is a combined tremolo and autopan effect. It can use different waveforms to
modulate the level (tremolo) or left-right stereo position (pan), either using tempo sync
or manual modulation speed settings.
The following parameters are available:
Cubase
LE
Cubase
AI
Cubase
Elements
Cubase
Artist
Cubase Nuendo NEK
Included with
X X X X X X –
Parameter Description
Waveform buttons Set the modulation waveform.
Depth Sets the depth of the Chopper effect. This can also be set by clicking
in the graphical display.
Speed If tempo sync is on, this is where you specify the base note value for
tempo-syncing the effect (1/1 to 1/32, straight, triplet, or dotted).
Note that there is no note value modifier for this effect.
If tempo sync is off, the tremolo/auto-pan speed can be set freely
with the Speed knob.
Sync button The button above the Speed knob switches tempo sync on (button
lights up) or off.
Stereo/Mono
button
Determines whether the Chopper works as an auto-panner (button
set to “Stereo”) or a tremolo effect (button set to “Mono”).
Mix Sets the level balance between the dry and the wet signal. If Chopper
is used as a send effect, this should be set to the maximum value.