Plug-in Reference

67
The Included Effect Plug-ins
Modulation Plug-ins
Modulation Plug-ins
This section contains descriptions of the plug-ins in the “Modulation” category.
AutoPan
This is a simple auto-pan effect. It can use different waveforms to modulate the left-
right stereo position (pan), either using tempo sync or manual modulation speed
settings.
The following parameters are available:
Ö If side-chaining is supported, the Width parameter can also be controlled from
another signal source via the side-chain input. For a description of how to set up side-
chain routing, see the Operation Manual.
Lo Applies a lower level of dither noise.
Auto black When this is activated, the dither noise is gated (muted) during silent
passages in the material.
Option Description
!
Dithering should always be applied post-fader on an output bus.
Cubase
LE
Cubase
AI
Cubase
Elements
Cubase
Artist
Cubase Nuendo NEK
Included with
X X X X X X –
Side-chain
support
– – – X X X –
Parameter Description
Rate If tempo sync is on, this is where you specify the base note value for
tempo-syncing the effect (1/1 to 1/32, straight, triplet, or dotted).
If tempo sync is off, the auto-pan speed can be set freely with the
Rate knob.
Sync button The button below the Rate knob switches tempo sync on or off.
Width Sets the depth of the auto-pan effect.
Waveform Shape
selector
Allows you to select the modulation waveform. A sine and a triangle
waveform are available.