Plug-in Reference

66
The Included Effect Plug-ins
Mastering Plug-ins
The following parameters are available:
Ö If side-chaining is supported, the Pedal parameter can also be controlled from another
signal source via the side-chain input. The louder the signal, the more the filter
frequency (Pedal) is raised so that the plug-in acts as an auto-wha effect. For a
description of how to set up side-chain routing, see the Operation Manual.
MIDI Control
For realtime MIDI control of the Pedal parameter, MIDI must be directed to the
WahWah plug-in.
• Whenever WahWah has been added as an insert effect (for an audio track or an
FX channel), it is available on the Output Routing pop-up menu for MIDI tracks.
If WahWah is selected on the Output Routing menu, MIDI data is directed to the
plug-in from the selected track.
Mastering Plug-ins
This section contains descriptions of the plug-ins in the “Mastering” category.
UV22HR
The UV22HR is a dithering plug-in, based on an advanced algorithm developed by
Apogee. For an introduction to the concept of dithering, see the Operation Manual.
The following parameters are available:
Parameter Description
Pedal Controls the filter frequency sweep.
Pedal Control
(MIDI) pop-up
menu
Allows you to choose the MIDI controller that controls the plug-in.
Set this to “Automation” if you do not want to use MIDI realtime
control.
Freq Lo/Hi Set the frequency of the filter for the Lo and Hi Pedal positions.
Width Lo/Hi Set the width (resonance) of the filter for the Lo and Hi Pedal
positions.
Gain Lo/Hi Set the gain of the filter for the Lo and Hi Pedal positions.
Filter Slope
selector
Allows you to choose between two filter slope values: 6 dB or 12 dB.
Cubase
LE
Cubase
AI
Cubase
Elements
Cubase
Artist
Cubase Nuendo NEK
Included with
– – X X X X –
Option Description
Bit Resolution The UV22HR supports dithering to multiple resolutions: 8, 16, 20 or
24 bits. Select the resolution by clicking the corresponding button.
Hi Try this first, it is the most all-round setting.