Plug-in Reference
Table Of Contents
- Table of Contents
- The Included Effect Plug-ins
- MIDI Effects
- The Included VST Instruments
63
The Included Effect Plug-ins
Filter Plug-ins
StepFilter
StepFilter is a pattern-controlled multimode filter that can create rhythmic, pulsating
filter effects.
Low Cut
Preview button
This button is located between the “Low Cut Freq” button and the
graphical display. Use it to switch the filter to a complementary
high-cut filter. This deactivates any other filters, allowing you to
listen only to the frequencies you want to filter out.
Spectrum Shows the spectrum before and after filtering.
Notch Freq Sets the frequency of the notch filter.
Notch Gain Adjusts the gain of the selected frequency. Use positive values to
identify the frequencies that you want to filter out.
Notch Gain
Invert button
Inverts the gain value of the notch filter. Use this button to filter out
unwanted noise. When looking for the frequency to omit, it
sometimes helps to boost it first (set the notch filter to positive
gain). After you have found it, you can use the Invert button to
cancel it out.
Notch Q-Factor Sets the width of the notch filter.
Notch Preview button This button is located between the notch filter buttons and the
graphical display. Use it to create a band-pass filter with the peak
filter’s frequency and Q. This deactivates any other filters, allowing
you to listen only to the frequencies you want to filter out.
Notches buttons
(1, 2, 4, 8)
These buttons add additional notch filters to filter out harmonics.
High Cut Freq
(3 to 20 kHz, or Off)
Use this high-cut filter to eliminate high-frequency noise. The filter
is off when the curve point is moved all the way to the right.
High Cut Slope
pop-up menu
Allows you to choose a slope value for the high-cut filter.
High Cut Preview
button
This button is located between the High Cut Freq button and the
graphical display. Use it to switch the filter to a complementary
low-cut filter. This deactivates any other filters, allowing you to
listen only to the frequencies you want to filter out.
Parameter Description
Cubase
LE
Cubase
AI
Cubase
Elements
Cubase
Artist
Cubase Nuendo NEK
Included with
– – X X X X –