Plug-in Reference

49
The Included Effect Plug-ins
EQ Plug-ins
Group Bar and Hint Line
Ö Note that the group bar is not visible if the “Min Infrastructure” option in the Settings
window is activated. In that case, you can use the Routing selector to select a channel
group.
Channel Group List
CurveEQ shows a list of input channels that are routed to the selected channel group.
This list is connected to the Channel Routing window and displays routing settings
defined by it. Internal channel names (A, B, C, etc.) that accept the corresponding
input channel are displayed in a superscript style. These internal channel names are
also displayed on the level meters. If more than one input channel is routed to the
same internal channel, the sum is displayed in the form “(IN1+IN2)”.
When the internal channel is assigned to a mid/side group, its input channels are
written in parentheses with the “m” (mid) or “s” (side) prefix. For example, “s(IN1 &
IN2)” means “side part of the mid/side pair consisting of IN1 and IN2 input channels”.
Hint Line
This interface element displays hint messages and can also display other informational
messages. The hint line can be disabled in the Settings window.
Parameter Description
Group 1/2/3/4 These buttons represent the channel groups. You can select the
channel group whose parameters are being edited or monitored.
Only groups that are assigned to the internal channels in the
Channel Routing window are shown.
Solo Allows you to solo the output of the selected group. The state of the
Solo button is not saved between project sessions and is not
restored when the project is reloaded.
Copy To Allows you to copy parameter settings defined for the selected
channel group to another channel group.
Reset Resets the parameters of the active group.