Plug-in Reference

43
The Included Effect Plug-ins
EQ Plug-ins
Band 4 Inv button Inverts the gain value of the filter (see the description of the Invert
button for Band 1).
Band 4 Gain
(-20 to +24 dB)
Sets the amount of attenuation/boost for the high band.
Band 4 Freq
(200 to 20000 Hz)
Sets the frequency of the high band.
Band 4 Q-Factor
(0.5 to 10)
Controls the width or resonance of the high band.
Band 4
Filter mode
For the high band, you can select between three types of shelving
filters, a Peak, and a Cut filter. When Cut mode is selected, the
Gain parameter is fixed.
-Shelf I adds resonance in the opposite gain direction slightly
below the set frequency.
-Shelf II adds resonance in the gain direction at the set
frequency.
-Shelf III is a combination of Shelf I and II.
Output
(-24 to +24 dB)
This knob on the top right of the plug-in panel adjusts the overall
output level.
Auto Gain button When this button is activated, the gain is automatically adjusted,
keeping the output level constant regardless of the EQ settings.
Spectrum Shows the spectrum before and after filtering.
Reset Resets the EQ settings.
Parameter Description