Plug-in Reference

41
The Included Effect Plug-ins
EQ Plug-ins
StudioEQ
StudioEQ is a high-quality 4-band parametric stereo equalizer with two fully
parametric mid-range bands. The low and high bands can act as either shelving filters
(three types), or as a Peak (band-pass) or Cut (low-pass/high-pass) filter.
Making Settings
1. Click the corresponding On button on the left of the plug-in panel to activate any
or all of the 4 equalizer bands (Low, Mid 1, Mid 2, and High).
When a band is activated, the corresponding EQ point appears in the EQ curve
display.
2. Set the parameters for an activated EQ band.
This can be done in several ways:
- By using the knobs.
- By clicking on the numeric values and entering new values.
- By using the mouse to drag points in the EQ curve display.
Digi Stand In this mode the resonance of the last band depends on the sample
rate.
Classic Applies a classic parallel filter structure where the response does not
follow the set gain values accurately.
Variable Q Applies parallel filters where the resonance depends on the amount
of gain.
ConstQ u Applies parallel filters where the resonance of the first and last bands
depends on the sample rate.
ConstQ s Applies parallel filters where the resonance is raised when boosting
the gain and vice versa.
Resonant Applies serial filters where a gain increase of one band lowers the
gain in adjacent bands.
Filter mode Description
Cubase
LE
Cubase
AI
Cubase
Elements
Cubase
Artist
Cubase Nuendo NEK
Included with
– – – X X X –