Plug-in Reference

212
The Included VST Instruments
Diagrams
The parameters are as follows:
SR Parameters
With these buttons you can change the sample rate. Lower sample rates basically
reduce the high frequency content and sound quality, but the pitch is not altered. This
is a great way to emulate the lo-fi sounds of older digital synths!
- If button “F” is active, the selected Part’s program plays back with the sample rate
set in the host application.
- If button “1/2” is active, the selected Part’s program plays back with half the
original sample rate.
- If button “1/4” is active, the selected Part’s program plays back with a quarter of
the original sample rate.
• A bonus effect of using lower sample rates is that it reduces the load on the
computer CPU, allowing more simultaneous voices to be played, etc.
Diagrams
Prologue
Parameter Description
Song Sync This switches tempo sync of the Rate parameter on or off.
Rate Sets the rate of the LFOs modulating the delay time. If Song Sync is
activated the rate is synced to various beat increments.
Depth This parameter controls the depth of the delay time modulation.
Delay This parameter sets the delay time of the four delay lines.
Feedback The feedback parameter controls the amount of positive or negative
feedback for all four delay lines. The adjustable range is from -1 to 1.
Level This controls the output level of the effect.