Plug-in Reference

17
The Included Effect Plug-ins
Distortion Plug-ins
Tape Delay Delay Tape Delay creates a delay effect known from tape
machines. The Delay parameter sets the delay time in
milliseconds.
This parameter can be synchronized to the project
tempo, see
“Sync Mode” on page 18.
Feedback Sets the number of repeats for the delay.
Mix Sets the level balance between the dry and the wet
signal.
Tape Ducking
Delay
Delay Tape Ducking Delay creates a delay effect known from
tape machines with a ducking parameter. The Delay
parameter sets the delay time in milliseconds.
This parameter can be synchronized to the project
tempo, see
“Sync Mode” on page 18.
Feedback Sets the number of repeats for the delay.
Duck Works like an automatic mix parameter. If the level of the
input signal is high, the portion of the effect signal is
lowered, or ducked (low internal mix value).
If the level of the input signal is low, the portion of the
effect signal is raised (high internal mix value). This way
the delayed guitar signal stays rather dry during loud or
intensely played passages.
Overdrive Drive Overdrive creates a tube-like overdrive effect. The
higher the Drive value, the more harmonics are being
added to the output signal of this effect.
Tone Works as a filter effect on the added harmonics.
Level Adjusts the output level.
Fuzz Boost Fuzz creates a rather harsh distortion effect. The higher
the Boost value, the more distortion is being created.
Tone Works as a filter effect on the added harmonics.
Level Adjusts the output level.
Gate Threshold Determines the level where Gate is activated. Signal
levels above the set threshold trigger the gate to open,
and signal levels below the set threshold close the gate.
Release Sets the time after which the gate closes.
Equalizer Low Changes the level of the low-frequency portion of the
incoming signal.
Middle Changes the level of the mid-frequency portion of the
incoming signal.
High Changes the level of the high-frequency portion of the
incoming signal.
Reverb Type A convolution-based reverb effect. The Type parameter
allows you to switch between different reverb types
(Studio, Hall, Plate, and Room).
Mix Sets the level balance between the dry and the wet
signal.
Effect Option Description