Plug-in Reference

151
MIDI Effects
Track Control
XG 2
In this mode, the parameters affect global settings in the instrument(s). Changing one
of these settings for a track affects all MIDI instruments connected to the same MIDI
output, regardless of the MIDI channel setting of the track. Therefore, to avoid
confusion it might be a good idea to create an empty track and use this only for these
global settings.
The following controls are available:
Attack Adjusts the attack time of the sound. Lowering this value shortens the
attack, while raising it gives a slower attack. Middle position means
no adjustment is made.
Release Adjusts the release time of the sound. Lowering this value shortens
the release, while raising it makes the release time longer. Middle
position means no adjustment is made.
Harm.Cont Adjusts the harmonic content of the sound.
Bright Adjusts the brightness of the sound.
CutOff Adjusts the filter cutoff frequency.
Resonance Adjusts the filter resonance.
Control Description
Eff. 1 Allows you to select which type of reverb effect should be used:
No
effect (the reverb turned off), Hall 1–2, Room 1–3, Stage 1–2, or
Plate.
Eff. 2 Allows you to select which type of chorus effect should be used:
No
effect (the chorus turned off), Chorus 1–3, Celeste 1–3, or
Flanger 1–2.
Eff. 3 Allows you to select one of a large number of “variation” effect types.
Selecting “No Effect” is the same as turning off the variation effect.
Reset Sends an XG reset message.
MastVol Controls the Master Volume of an instrument. Normally you should
leave this in its highest position and set the volumes individually for
each channel (with the volume faders in the MixConsole or in the
Inspector).
Control Description