Plug-in Reference

115
The Included Effect Plug-ins
Tools Plug-ins
Frequency Spectrum Analyzer Mode (Freq.)
• Click the Freq button so that it lights up.
MultiScope now divides the frequency spectrum into separate vertical bands,
which allows you to get a visual overview of the different frequencies’ relative
amplitude. The frequency bands are shown left to right, starting with the lower
frequencies.
• If the source signal is stereo you can now select either the Left or Right channel for
viewing, or Stereo for both channels to be shown in the window. If it is a mono
signal, this does not matter.
• If MultiScope is used with a multi-channel track or output bus, you can select any
speaker channel for viewing, or All Channels to view them all at once.
• Adjust the Amplitude knob to increase/decrease the vertical range of the bands.
• By adjusting the Frequency knob, you can divide the frequency spectrum into 8,
15, or 31 bands, or you set it to “Spectrum”, which gives you a high-resolution
view.
• Use the Mode A and Mode B buttons to switch between different view modes.
Mode A is more graphically detailed, showing a solid, blue amplitude bar for each
band. Mode B is less detailed, showing a continuous blue line that displays the
peak levels for each band. These view modes do not have any effect if you have set
the Frequency knob to “Spectrum”.