Plug-in Reference

104
The Included Effect Plug-ins
Spatial + Panner Plug-ins
Ö Keep in mind that the amount of LFE can be adjusted for each input channel
individually, see
“Individual Channel Adjustment” on page 99.
Ö If the selected input configuration includes an LFE channel, but the selected output
configuration does not, the LFE input channel is distributed to front left and front right
at a level of -3
dB automatically. The low-pass filter is applied to the incoming LFE
signal before it is distributed to the front speakers.
MonoToStereo
This effect turns a mono signal into a pseudo-stereo signal. The plug-in must be
inserted on a stereo track playing a mono file.
The following parameters are available:
LP Cutoff Sets the cutoff frequency for the generated LFE channel.
LP Order Allows you to select the order, or slope, of the low-pass filter:
2nd order = 12 dB/octave
3rd order = 18 dB/octave
4th order = 24 dB/octave
Option Description
Cubase
LE
Cubase
AI
Cubase
Elements
Cubase
Artist
Cubase Nuendo NEK
Included with
– X X X X X –
Parameter Description
Width Controls the width or depth of the stereo enhancement. Turn
clockwise to increase the enhancement.
Delay Increases the amount of differences between the left and right
channels to further increase the stereo effect.
Color Generates additional differences between the channels to increase
the stereo effect.
Mono button Switches the output to mono, to check for possible unwanted
coloring of the sound which sometimes can occur when creating an
artificial stereo image.