Plug-in Reference

103
The Included Effect Plug-ins
Spatial + Panner Plug-ins
Advanced Options
The Advanced options can be opened using the top left button in the main plug-in
panel. These options can be set for the plug-in instance by adjusting the values as
needed.
Distance Dependent Parameters
In the “Distance dependent” section, the following parameters are available:
Upmix – Matrix
Activates matrix decoding for matrix-encoded input signals.
Ö Matrix decoding is only applied in upmix mode.
LFE Parameters
In the LFE section, the following parameters are available:
Option Description
Loudness Allows you to select whether the volume change that is to be
applied depends on the position of the center point, or if the volume
change is calculated for each input channel separately.
Sets the maximum gain reduction that is applied when the group
input or channel reaches the stage border.
EQ Gain Allows you to select whether the filtering that is to be applied
depends on the position of the center point, or if the amount of
filtering is calculated for each input channel separately.
Sets the maximum gain reduction of the filter that is applied when
the group or input channel reaches the stage border.
EQ Cutoff Sets the cutoff frequency of the distance-dependent EQ.
Option Description
LFE Gain Sets a separate gain level for the LFE channel that is applied to the
plug-in output.
LP Enable Enables a low-pass filter that is applied to the LFE output channel
after summing the signals from the input channels.