Plug-in Reference

102
The Included Effect Plug-ins
Spatial + Panner Plug-ins
Ö The position parameters for the input group and any created automation are
preserved when the upmix is enabled. In upmix mode, the sound image created by the
upmix algorithm can be moved around the stage and is also fully automatable. The
parameters that you have adjusted for a single channel have no influence on the
upmix, but they are kept and automatically reloaded when the upmix is disabled.
Upmix Presets
Anymix Pro comes with a set of preconfigured upmix presets. When a preset is
loaded, the upmix and advanced parameters are set accordingly and can be further
adjusted.
An upmix preset contains settings for the following upmix parameters: “Divergence”,
“Stage Width”, “Direct Dry/Wet”, “Ambience Gain”, “Ambience Front/Rear”,
“Ambience Low Pass”, and “Ambience Delay”. Furthermore, the following parameters
on the Advanced panel are affected by the preset: “LFE Gain”, “LFE Low Pass
Enable”, “LFE Low Pass Order”, “LFE Low Pass Cutoff Frequency”, and “Output
Gain”.
Ö Upmix presets from the “Cinema” category are designed for the use with X-curve
tuned speaker systems. The other presets are designed for listening environments
with a flat speaker tuning.
Input – Balance
Adjusts the balance of the input signal if the input signal is stereo or higher.
Upmix – Orig./Upmix
Adjusts the plug-in output between original and processed signal.
Direct Sound Stream Parameters
In the Direct section, the following parameters are available:
Ambient Sound Stream Parameters
In the Ambience section, the following parameters are available:
Option Description
Divergence Controls the strength of the center signal.
At 0 % the mono components of the direct sound stream are
distributed to the center channel.
At 100 % the mono components of the direct sound stream are
distributed to the front left and right channels.
Stage Width Controls the position of the front channels to adjust the stereo base.
Dry/Wet Controls the amount of ambience that remains in the direct sound
stream after the ambience extraction.
Option Description
Gain Applies gain to the ambient sound stream to either emphasize (high
gain) or dampen (low gain) the amount of ambience in the mix.
Front/Rear Adjusts the front/rear balance of the ambient sound stream.
Low Pass Controls the ambient sound stream with a low-pass filter to prevent
hissing.
Delay Adds extra delay to the ambient sound stream to create the illusion
of a very large space.