User manual

355
MIDI realtime parameters and effects
3. Click in one of the insert slots to open the MIDI effect
pop-up menu.
4. Select the desired MIDI effect from the pop-up menu.
The effect is automatically activated (the power button for the insert slot
lights up) and its control panel appears, either in a separate window or in
the MIDI Inserts section below the slot (depending on the effect).
Now all MIDI from the track will be routed through the
effect.
5. Use the control panel to make settings for the effect.
All included MIDI effects are described in the separate PDF document
“Plug-in Reference”.
• You can bypass the insert effect by clicking its power
button (above the insert slot).
• To bypass all insert effects for the MIDI track, use the
bypass button in the MIDI Inserts section in the Inspector,
in the Mixer channel strip or in the track list.
• To remove an insert effect, click in its slot and select
“No Effect”.
Managing plug-ins
Selecting Plug-in Information from the Devices menu
opens a window in which all loaded plug-ins, audio and
MIDI, are listed.
• To view the MIDI effect plug-ins, click the MIDI Plug-ins
tab.
• The leftmost column allows you to deactivate plug-ins.
This is useful if you have plug-ins installed that you do not want to use in
Cubase. Only plug-ins that are activated (ticked checkbox) will appear
on the MIDI effect pop-up menus.
Note that plug-ins that are currently in use cannot be deactivated.
• The second column shows how many instances of each
plug-in are currently used in the project.
• The remaining columns show various information about
each plug-in and cannot be edited.