Plug-in Reference

37
The included effect plug-ins
Vibrato
The Vibrato plug-in produces pitch modulation. The fol-
lowing parameters are available:
Ö The modulation can also be controlled from another
signal source via the side-chain input. When the side-
chain signal exceeds the threshold, the modulation is con
-
trolled by the side-chain signal’s envelope. For a descrip-
tion of how to set up side-chain routing, see the chapter
“Audio effects” in the Operation Manual.
Pitch Shift plug-ins
This section contains descriptions of the plug-ins in the
“Pitch Shift” category.
Octaver
This plug-in can generate two additional voices that track
the pitch of the input signal one octave and two octaves
below the original pitch, respectively. Octaver is best used
with monophonic signals.
The following parameters are available:
Parameter Description
Rate If tempo sync is on, this is where you specify the base
note value for tempo-syncing the effect (1/1 to 1/32,
straight, triplet, or dotted).
If tempo sync is off, the modulation speed can be set
freely with the Rate knob.
Sync button The button below the Rate knob is used to switch tempo
sync on or off.
Depth Governs the depth of the pitch modulation.
Spatial Adds a stereo effect to the modulation.
Parameter Description
Direct Adjusts the mix of the original signal and the generated
voices. A value of 0 means only the generated and trans
-
posed signal is heard. By raising this value, more of the
original signal is heard.
Octave 1 Adjusts the level of the signal that is generated one oc-
tave below the original pitch. A setting of 0 means that
the voice is muted.
Octave 2 Adjusts the level of the signal that is generated two oc-
taves below the original pitch. A setting of 0 means that
the voice is muted.