User manual

621
Tips and Tricks
Overview
This chapter provides useful information about editing
techniques and answers to a number of questions that
might arise when you use the Score Editor. For more infor-
mation about the functions referred to, please use the in-
dex and check the previous chapters.
Useful editing techniques
Use this section to find out more about some editing tech-
niques that will help you to use the score functions more
efficiently.
Moving a note without transposing it
If you hold down [Ctrl]/[Command] while moving a note (or
several notes), only horizontal movements are possible, so
that you do not have to worry about the notes being trans-
posed. You can also set up a key command for this. This is
done in the Key Commands dialog (Nudge category).
Moving and spacing several staves
If you have a number of staves that you want displayed
with an equal distance (for example, all strings of a grand
staff in a full orchestra score), this can be done using the
Position Info window:
1. Open the Preferences (Scores–Editing page) and de-
activate the option “Global staff Spacing with [Alt Gr]/
[Option]-[Command]”.
2. In the score, select the staves you want to set to an
equal distance.
3. Open the Position Info window by clicking on the ruler.
4. Use the To Previous Staff or To Next Staff settings to
specify the desired distance between the staves.
All selected staves are spaced according to your settings.
• If you do this when the option “Global staff Spacing
with [Alt Gr]/[Option]-[Command]” is activated, all staves
in the score are affected.
Polyphonic voicing
If you are working on a full score with more than one in-
strument in one staff (2 flutes, 2 trumpets, etc.), you
should use polyphonic voices. And even if both instru-
ments play the same notes, you should insert notes for
both instruments (you can mute the notes of the second
voice, if playback is an issue). If you do this, it will be much
easier to extract single parts later by using the “Extract
Voices” command.
Using the bar handles
Double-clicking a bar handle opens the Bar Copy dialog.
This function is great for copying accents, but you can
also use it for copying drum phrases, etc. For more infor-
mation, see “Moving and duplicating with the bar handles”
on page 568.
• If you hold down [Shift] and double-click on a bar han-
dle, this and the next bar are selected.
This is handy when copying phrases of two or more bars in one go.
Copying a section with “invisibles”
If you want to copy and paste a section which contains
hidden elements, adjusted beams and stems, etc., there
are two ways to proceed:
• Use the filter bar to make indicators appear in the score.
Then select these indicators together with the notes be-
fore you copy.
This ensures the notes are copied with their formatting, etc.
• Double-click the bar handle of one of the bars, and
make sure all relevant event types are activated in the dia-
log. Then select the bars you want to copy by clicking their
bar handles, and copy them by [Alt]/[Option]-dragging the
bar handles.
For more information, see “Moving and duplicating with the bar handles”
on page 568.
Using “Scores Notes To MIDI”
This function converts the score data, as displayed, into
MIDI data. Let’s say for example that you have set up the
score so that it is displayed to 99% the way you want it to
be. Yet, that last 1% forces you to deactivate some of the
Staff Settings (like Clean Lengths, No Overlap or Auto
Quantize), which makes other parts of the score illegible.
In this case, try using the function “Scores Notes To
MIDI”. Note that you should work on a copy of the track!
For more information, see “Using “Scores Notes To MIDI””
on page 510.