User manual

317
Using MIDI devices
Installing a preset MIDI device
To install a preset MIDI device, proceed as follows:
1. Click the Install Device button.
A dialog appears listing all pre-configured MIDI devices. For now we as-
sume that your MIDI device is included in this list.
2. Locate and select the device in the list and click OK.
• If your MIDI device is not included in the list but is com-
patible with the GM (General MIDI) or XG standards, you
can select the generic GM or XG Device options at the
top of the list.
When you select one of these options, a name dialog will appear. Enter a
name for the instrument and click OK.
The device now appears in the Installed Devices list to the
left.
3. Make sure that the new device is selected in the list
and open the Output pop-up menu.
4. Select the MIDI output that the device is connected to.
5. If you are using Cubase, click the Open Device button.
A separate window opens for the selected device, showing a node
structure in the left half of the window. At the top of this structure is the
device itself, and below it the MIDI channels used by the device. For
more information about the Device window, see the separate pdf docu-
ment “MIDI Devices”.
6. Select Patch Banks from the pop-up at the top of the
window.
The Patch Banks list in the left half of the window shows
the patch structure of the device. This could simply be a
list of patches, but it is usually one or several layers of
banks or groups containing the patches (much like a
folder structure on a hard disk for example).
• You can rename a device in the Installed Devices list by
double-clicking and typing – this is useful if you have sev-
eral devices of the same model, and want to separate
them by name instead of by number.
• To remove a device from the Installed Devices list, se-
lect it and click Remove Device.
Ö Note that if there already exists a panel for the device
(Cubase only), opening the device might open this panel
first. In this case, click on the Edit (“e”) button to open the
Device window.
About Patch Banks
Depending on the selected device, you may find that the
Patch Banks list is divided in two or more main banks. Typ-
ically, these are called Patches, Performances, Drums, etc.
The reason for having several patch banks is that different
“types” of patches are handled differently in the instru-
ments. For example, while “patches” typically are “regular”
programs that you play one at the time, “performances”
may be combinations of programs, which could e.g. be
split across the keyboard, layered or used for multi-timbral
playback.
For devices with several banks, you will find an additional
item labeled “Bank Assignment” in the pop-up at the top
of the window. Selecting this opens a window in which
you can specify for each MIDI channel which bank it
should use.
The selection here will affect which bank is displayed
when you select programs by name for the device in the
Track list or Inspector. For example, many instruments use
MIDI channel 10 as an exclusive drum channel, in which
case you would want to select the “Drums” (or “Rhythm
Set”, “Percussion”, etc.) bank for channel 10 in this list.
This would then let you choose between different drum
kits in the Track list or Inspector.