Plug-in Reference

105
MIDI effects
Length Decay
This parameter lets you adjust how the length of the ech-
oed notes should change with each successive repeat.
The higher the setting (25–100), the longer the echoed
notes will be, compared to their original notes.
About ticks and note values
The timing and position-related parameters (Delay, Length
and Pre Delay) can all be set in ticks (or PPQ which de-
notes the same thing here). There are 480 ticks to each
quarter note. While the parameters allow you to step be-
tween the rhythmically relevant values (displayed as note
values), the following table can also be of help, showing
you the most common note values and their correspond-
ing number of ticks:
MIDI Modifiers
This plug-in is essentially a duplicate of the MIDI Modifiers
section in the Inspector. This can be useful, for example, if
you need extra Random or Range settings.
The MIDI Modifiers effect also includes an additional func-
tion that isn’t available among the track parameters:
Scale Transpose
This allows you to transpose each incoming MIDI note, so
that it fits within a selected musical scale. The scale is
specified by selecting a key (C, C#, D, etc.) and a scale
type (major, melodic or harmonic minor, blues, etc.).
Ö To turn Scale Transpose off, select “No Scale” from
the Scale pop-up menu.
Note Value Ticks
1/32 note 60
1/16 note triplet 90
1/16 note 120
1/8 note triplet 160
1/8 note 240
Quarter note triplet 320
Quarter note 480
Half note 960