User manual

359
The MIDI editors
Other editing methods
As in the Key Editor, you can edit notes on the info line or
via MIDI, and enter notes using step input, see “Editing on
the info line” on page 348.
Working with drum maps
Background
A drum kit in a MIDI instrument is most often a set of dif-
ferent drum sounds with each sound placed on a separate
key (i.e. the different sounds are assigned to different MIDI
note numbers). One key plays a bass drum sound, another
a snare and so on.
Unfortunately, different MIDI instruments often use differ-
ent key assignments. This can be troublesome if you have
made a drum pattern using one MIDI device, and then
want to try it on another. When you switch device, it is very
likely that your snare drum becomes a ride cymbal, or your
hi-hat becomes a tom, etc. – just because the drum
sounds are distributed differently in the two instruments.
To solve this problem, and simplify several aspects of MIDI
drum kits (like using drum sounds from different instru-
ments in the same “drum kit”), Cubase features so-called
drum maps. A drum map is a list of drum sounds, with a
number of settings for each sound. When you play back a
MIDI track for which you have selected a drum map, the
MIDI notes are “filtered” through the drum map before be-
ing sent to the MIDI instrument. Among other things, the
map determines which MIDI note number is sent out for
each drum sound, and so which sound is played in the re-
ceiving MIDI device.
A solution to the problem above would therefore be to set
up drum maps for all your instruments. When you want to
try your drum pattern on another instrument, you simply
switch to the corresponding drum map and your snare
drum sound will remain a snare drum sound.
Drum map settings
A drum map consists of settings for 128 drum sounds
(one for each MIDI note number). To get an overview of
these settings, open the Drum Editor and use the Map
pop-up menu below the drum sound list to select the “GM
Map” drum map.
This drum map is set up according to the General MIDI standard. For in-
formation on how to load, create and select other drum maps, see
“Managing drum maps” on page 361.
Now, take a look at the drum sound list (you may have to
drag the divider between the list and the note display to
the right to see all columns). The columns show the set-
tings of the drum map for each sound.
Here’s a brief description (details follow below):
Column Description
Pitch The actual note number of the drum sound. This is what
links notes on a MIDI track to drum sounds. For example,
with the above drum map, all MIDI notes with the pitch
C1 would be mapped to the Bass Drum sound.
Instrument The name of the drum sound.
Quantize This value is used when entering and editing notes as de-
scribed in the sections “Creating and editing notes” on
page 357 and “Moving, duplicating or repeating notes”
on page 358.
Mute Allows you to mute a drum sound, excluding it from play-
back. See “Muting notes and drum sounds” on page 358.