Remote Control Devices

17
Remote controlling Cubase
• Enter button: set the project cursor to the position according
to the new value.
• Store Marker button: set the project cursor to the position ac-
cording to the new value, and create a marker at the new
project cursor position.
With the Num-LED off:
• Use the “1” button for page up (step through pages of one pa-
rameter group).
• Hold down Shift and press the “1” button to jump to the last
page.
• Use the “6” button for page down.
• Hold down Shift and press the “6” button to jump to the first
page.
• Press the Enter button to switch the display of names of the
available parameters in the lower row on or off.
• The function keys “2” to “5”, “7” to “0” and function key com-
binations with the Shift button can be used to access func-
tions in Cubase. Refer to the Cubase operation manual for
information about how to assign program functions to remote
controller function keys.
Some of the keys are already pre-assigned (and/but can be
modified):
“5” button: undo the last operation in Cubase. Hold down
Shift and press the “5” button to “undo the undo”.
“7” button: copy; hold down Shift and press the “7” button to
cut.
“9” button: paste.
“0” button: save the current project; hold down Shift and
press the “0” button to save a backup copy of the current
project.
Hold down Shift and press the “2”, “3”, “4” or “8” buttons to
control zooming in the Project window.
Pan button in the Mixer-Mode section: Fader Set mode
Panning:
• Page 1 – Pan left/right
•Page 2 – Pan front/rear
• Pressing a V-Pot will toggle Monitor for that channel.
High button: Fader Set mode EQ High:
•Page 1 – Gain
• Page 2 – Frequency
•Page 3 – Q
• Page 4 – Enable
• Pressing a V-Pot will bypass EQs for that channel.
HiMid, LowMid, Low button: Fader Set mode EQ Mid-
High, Mid-Low, Low (same functionality as above).
Snd/Ins 1 button: Fader Set mode Send 1:
• Page 1 – Level
• Page 2 – Enable
• Page 3 – Pre/Post
•Page 4 – Bus
• Pressing a V-Pot will bypass sends for that channel.
Snd/Ins 2 to 4 buttons: Fader Set mode Send 2 to Send 4
(same functionality as above). Depending on the Snd/Ins
button status (above Snd/Ins 1 button) Snd/Ins 1 to Snd/
Ins 4 buttons are assigned to Send 1 to Send 4 or Send 5
to Send 8.
EQs button (Channel-Strips section): Selected Channel
mode EQ:
• Page 1 – Gain, Frequency, Q and Enable for the lo band,
Gain, Frequency, Q and Enable for the lo mid band
• Page 2 – Gain, Frequency, Q and Enable for the hi mid band,
Gain, Frequency, Q and Enable for the hi band
• Pressing a V-Pot will bypass EQs.
Inserts/Sends button: Selected Channel mode Sends:
• Page 1 – Level for Send 1 to Send 8
• Page 2 – Enable for Send 1 to Send 8
• Page 3 – Pre/Post for Send 1 to Send 8
• Page 4 – Bus for Send 1 to Send 8
• Pressing a V-Pot will bypass sends.
Dynamics button: Selected Channel mode Routing:
• Page 1 – Output Bus, Monitor, Input Bus, Input Gain, Input
Phase
• Pressing a V-Pot will toggle Monitor.
For a description of the functionalities for the MIDI button:
Selected Channel mode Inserts, Shift+Inserts/Sends but-
ton: Global mode Send Effects, Shift+Dynamics button:
Global mode Master Effects, Shift+MIDI button: Global
mode Instruments, see the separate pdf document
“Mackie Control and Cubase”.
In this version of Cubase, the following functions have
been added:
Instrument button: Selected channel mode Instrument:
• Page 1 – Select instrument
• Page 2-n – Instrument parameter