Quick Start

80
Tutorial 8: Editing audio II - tempo and groove
12. Click on the drum loop and select Loop Selection from
the Transport menu.
You can now hear that the drum loop is in perfect time
with the project’s tempo. Feel free to change the tempo
on the Transport by first deactivating the Tempo Track and
notice that the drum loop will follow.
Example 4: Working with selections
In this example we have an audio file with unknown tempo.
We only want to use a small section of the audio file to
create a drum loop.
1. Activate Start on the Transport panel and hear that the
drum loop is off time with the click.
2. Activate Stop and deactivate the Click.
3. Double-click on the drum loop.
The Sample Editor will open.
4. We are going to create a 2-bar loop from this audio
file. Make sure the Range Selection tool is selected. Click
and drag to make a selection to a portion of the audio file
that you will use as a drum loop. Somewhere just after bar
5 and just after bar 7.
To get the selection to match our example click on the
Range tab and enter 411427 in the Start field and
616843 in the End Field.
5. Click on the Hitpoints tab and choose Slice & Close.
You now have a loop that is cut to the selection you made and can now
loop to the project tempo. The Sample Editor will close and you will be
returned to the Project window.
6. Click on the drum loop and select Loop Selection from
the Transport menu.
You can now hear that the drum loop is in perfect time
with the project’s tempo. Feel free to change the tempo
on the Transport by first deactivating the Tempo Track and
notice that the drum loop will follow.
!
Load the project called “Tempo and Groove 6” found
in the “Tutorial 8” folder.
Range Selection tool
Range tab
Hitpoints tab
Slice & Close