Plug-in Reference

31
The included effect plug-ins
Tremolo
Tremolo produces amplitude (volume) modulation.
Parameters are as follows:
Vibrato
The Vibrato plug-in produces pitch modulation.
Parameter Description
Tempo sync
on/off
The button below the Rate knob is used to switch tempo
sync on or off. The button is lit when tempo sync is on.
Rate If tempo sync is on, this is where you specify the base
note value for tempo-syncing the effect (1/1 to 1/32,
straight, triplet or dotted).
If tempo sync is off, the modulation speed can be set
freely with the Rate knob, without sync to tempo.
Depth This governs the depth of the amplitude modulation.
Spatial This will add a stereo effect to the modulation.
Output Adjusts the output volume.
Side-Chain
On/Off
When this is activated, the modulation can be controlled
by a signal routed to the Side-Chain input. When the
side-chain signal exceeds the threshhold, the modulation
will be controlled by the side-chain signal’s envelope. For
a description of how to set up Side-Chain routing, see
the chapter “Audio effects” in the Operation Manual.
Parameter Description
Tempo sync
on/off
The button below the Rate knob is used to switch tempo
sync on or off. The button is lit when tempo sync is on.
Rate If tempo sync is on, this is where you specify the base
note value for tempo-syncing the effect (1/1 to 1/32,
straight, triplet or dotted).
If tempo sync is off, the modulation speed can be set
freely with the Rate knob, without sync to tempo.
Depth This governs the depth of the pitch modulation.
Spatial This will add a stereo effect to the modulation.
Side-Chain
On/Off
When this is activated, the modulation can be controlled
by a signal routed to the Side-Chain input. When the
side-chain signal exceeds the threshhold, the modulation
will be controlled by the side-chain signal’s envelope. For
a description of how to set up Side-Chain routing, see
the chapter “Audio effects” in the Operation Manual.