Mackie Control and Cubase

16
Control strip assignment
Selected Channel: EQ
Accessing the EQ controls for the currently selected
channel is achieved by pressing the EQ button in the As-
signment section. If you press Shift + EQ one band per
page will be shown for the selected channel.
Please select a channel by pressing one of the Select but-
tons above the faders.
The controls for the equalizers are divided into 2 pages:
• Page 1
Frequency and Gain pairs for the four bands.
• Page 2
Enable and Q controls for the four bands.
Selected Channel: FX Send
Accessing the FX Send (auxiliary) controls for the cur-
rently selected channel is done by pressing the DYN but-
ton in the Assignment section. Pressing Shift+ DYN will
step through Fader Set mode “FX Send 1” to “FX Send
8”.
Please select a channel by pressing one of the Select but-
tons above the faders.
The controls for the sends are divided into 4 pages:
• Page 1
Send Levels for each of the 8 FX Sends.
• Page 2
Enable switches for each of the 8 FX Sends.
• Page 3
Switches to change between pre/post fader mode.