Specifications

Software Installation
Operation Manual
11
ENGLISH
7 Insert the TOOLS for CC121 CD-ROM into
the CD-ROM drive.
Installing Steinberg CC121 Extension
8 Open the “Extensions_” folder on the CD-
ROM, then double-click the file “setup.exe.”
A “Welcome to the InstallShield Wizard for
Steinberg CC121 Extension” window appears.
NOTE
· If the same version of Steinberg CC121 Extensions
has already been installed in your computer, a soft-
ware ”Confirm Uninstall” window appears. In this
case, click [Cancel].
· If a newer version of Steinberg CC121 Extension has
already been installed in your computer, a dialog box
appears indicating that the newer software has
already been installed. In this case, you do not need
to install the software. Click [OK] in the dialog box.
9 Click [Next] to start the installation.
To cancel the installation, click [Cancel].
10 When a message appears indicating that
Steinberg CC121 Extension has been
installed successfully, click [Finish].
Installing USB-MIDI Driver
11 Press the [STANDBY/ON] switch of the
CC121 to set it to the ON position.
The “Found New Hardware Wizard” window
appears.
NOTE
· Some computers may take a while to display the Wiz-
ard window.
·A dialog box may appear asking you whether you
wish to connect to Windows Update. In this case,
select the radio button to the left of “Not at this time,”
then click [Next].
12 Select the radio button next to “Install the
software automatically” then click [Next].
This operation starts the USB-MIDI driver’s
installation.
NOTE
· If a message “The software you are installing has not
passed Windows Logo Testing” appears, click [Con-
tinue Anyway]. You do not need to abort the installa-
tion. If the message does not appear, proceed to the
next step.
13 When a message indicating installation is
complete appears, click [Finish].
14 When a window appears requiring you to
restart your computer appears, follow the
on-screen instructions to restart the com-
puter.
The USB-MIDI driver installation is complete.
This completes installation of the necessary soft-
ware.
Uninstalling the Software
Before deleting each software, first follow the steps
below.
1 Disconnect all other USB devices except
mouse and keyboard from the computer.
2 Log on to the Administrator account.
Exit any open applications and close all open
windows.
3 From the Start menu, select ([Settings] ➝)
[Control Panel] ➝ [Add or Remove Pro-
grams] to display the Add or Remove Pro-
grams panel.
4 Click “Change or Remove Programs”
located in the upper left, then select “Stein-
berg CC121 Extension” from the list in the
right panel.
5 To uninstall the software, click [Change/
Remove]/ [Remove].
A dialog box appears. Follow the on-screen
instructions to remove the software.
3 Insert the TOOLS for CC121 CD-ROM into
the CD-ROM drive.
4 Open the “Uninstall” folder in the
“USBdrv2k” folder on the CD-ROM, then
double-click the file “uninstall.exe.”
Follow the on-screen instructions to remove the
software.
5 When a message appears prompting you to
restart the computer for proper deletion of
the Driver, restart the computer by following
the on-screen instructions.
Removing Steinberg CC121 Extension
Removing USB-MIDI driver