STEICO_ENVIRONMENTAL PRODUCT DECLARATION

2
Environmental Product Declaration STEICO – wood fibre insulation
1. General Information
STEICO SE
Wood Fibre Insulation Materials
Programme holder
IBU - Institut Bauen und Umwelt e.V .
Panoramastr. 1
10178 Berlin
Germany
Owner of the Declaration
STEICO SE
Otto-Lilienthal-Ring 30
D-85622 Feldkirchen
Declaration number
EPD-STE-20150327-IBD1-EN
Declared product / Declared unit
1 m³ wood fibre insulation material
This Declaration is based on the Product
Category Rules:
Wood based panels, 07.2014
(PCR tested and approved by the SVR)
Issue date
05.02.2016
Valid to
04.02.2021
Scope:
This Declaration is an EPD which reflects an average
product of different product ranges which are produced
in the following factory:
STEICO SE, Route de Cocumont, 47700 Casteljaloux,
France
The following products were included in the calculation
of the average:
· STEICOflex
· STEICOtherm
· STEICOtherm internal
· STEICOthermSD
· STEICOunderfloor
· STEICOfloor
· STEICOisorel
· STEICOroof
· STEICOprotect M
· STEICOprotect H
· STEICOuniversal
· STEICOspecial
This document is translated from the German
Environmental Product Declaration into English. It is
based on the German original version EPD-
STE-20150327-IBD1-DE. The verifier has no influence
on the quality of the translation.The owner of the
declaration shall be liable for the underlying information
and evidence; the IBU shall not be liable with respect to
manufacturer information, life cycle assessment data
and evidences.
Verification
The CEN Norm /EN 15804/ serves as the core PCR
Independent verification of the declaration
according to /ISO 14025/
Prof. Dr.-Ing. Horst J. Bossenmayer
(President of Institut Bauen und Umwelt e.V.)
internally x externally
Dr. Burkhart Lehmann
(Managing Director IBU)
Prof. Dr. Birgit Grahl
(Independent verifier appointed by SVR)
2. Product
2.1 Product description
This Declaration describes a production volume-
weighted average of the wood fibre insulation materials
STEICOflex, STEICOtherm, STEICOtherm internal,
STEICOtherm SD, STEICOfloor, STEICOisorel,
STEICOroof, STEICOunderfloor, STEICOprotect M/H,
STEICOuniversal and STEICOspecial, which are
produced in both wet and dry processes.
The wood fibre insulation materials specified in the
Declaration are used uniformly in accordance with DIN
EN 13171 as insulating boards and as insulating mats
for buildings.
2.2 Application
The products specified under 2.1 are not only
pressure-resistant wood fibre insulation boards
produced using the wet process, but also mat-shaped