Manual

Advanced Heater Operation (cont'd)
The room temperature display can be set to read in Celsius or Fahrenheit. All other heater functions relating to
temperature will be reflected in Fahrenheit only. Use this conversion chart to equate the Fahrenheit reading to
Celsius, if desired.
Fahrenheit Celsius
87 30.6
88 31.1
89 31.7
90 32.2
91 32.8
92 33.3
93 33.9
94 34.4
95 35.0
96 35.6
97 36.1
98 36.7
99 37.2
100 37.8
200 93.3
400 204.4
600 315.6
800 426.7
1000 537.8
1200 648.9
1400 760.0
1600 871.1
1800 982.2
Fahrenheit Celsius
-40 -40.0
-30 -34.4
-20 -28.9
-10 -23.3
0 -17.8
5 -15.0
10 -12.2
15 -9.4
20 -6.7
25 -3.9
30 -1.1
32 0.0
35 1.7
40 4.4
45 7.2
50 10.0
55 12.8
60 15.6
61 16.1
62 16.7
63 17.2
64 17.8
Fahrenheit Celsius
65 18.3
66 18.9
67 19.4
68 20.0
69 20.6
70 21.1
71 21.7
72 22.2
73 22.8
74 23.3
75 23.9
76 24.4
77 25.0
78 25.6
79 26.1
80 26.7
81 27.2
82 27.8
83 28.3
84 28.9
85 29.4
86 30.0
27
2
TEMPERATURE CONVERSION CHART
3
DESCRIBING THE HEATER FUNCTIONS (L00 through L10)
All heater functions relating to temperature will be reflected in Fahrenheit, even if the room
temperature display is set to read in Celsius. The Celsius equivalency to Fahrenheit is listed next
to these temperature function descriptions for your reference. For a complete list of temperature
conversions, refer to the Temperature Conversion Chart, Table 5, in this manual.
Location 0 (L00) - Room Temperature Set Point
This is the room temperature set point. This set point typically is not adjusted in this location but rather
in the standard edit mode. The maximum value of this set point is dictated by the value in Location 8
(L08), and the minimum value is dictated by the value in Location 9 (L09).
Data Value Range: d00 to d99 (degrees Fahrenheit)
(Celsius equivalency: -17.8 to 37.2)
Refer to Adjusting the Room Temperature Set Point section of this manual for more information.
NOTE
NOTE