Instruction Manual

‐9‐

IMPORTANT!
• Ifyoucannothearanysoundbutthediscisplaying,
pleasechecktheVOLUMEknob(7)isturneduporthat
theBTON/OFFswitch(14)issettotheOFFposition.

PlayingaCDorMP3‐CDinaprogrammedorder
1. Programmingcanonlybedonewhiletheunitisat
STOPcondition.
2. TapthePROGbutton(13)“MEM”&“P01”&“00”
willshowontheLCDdisplay(15).
(ForMP3‐CD,“000”willshowontheLCDdisplay)
3. TapthetwoSKIP/SEARCHbuttons(10,11)toselect
thetrackyouwishto
program.
4. TapthePROGbutton(13)tosavetheselected
tracktothe“P01”position.
5. Then“P02”&“00”willshowontheLCDdisplay
(15).
6. Repeatsteps3&4tostoreothertracksinthe
ordertheyareprogrammed.
7. Youcanstoreupto20
tracksforCD&99tracksfor
MP3‐CD.
8. TapthePLAYbutton(4)tobeginplayingthe
programmedtracks.

Otherplayingmodes