User's Manual

ManualsBrandsSteelSeries ManualsElectronicsStratus XL Android



ForceConnectionMethod



z If the gamepad is not connected with the device before, it’ll enter force connection mode automatically

whenpoweron,andthefourLEDswillbeon&offevery0.5sinturn

z If the gamepad has been connectedbefore, it’ll only search for and connect with the previousconnected



deviceswhenpoweronagain,andthefourLEDswillbeon&offevery0.5sinturn

z When press and hold Force Connection button less than 5s, firstly, the 1

 & 2

 LEDs will be on for 1s;

Secondly,the3

&4

LEDswillbeonforanother1s;Thirdly,thegamepadwillsearchfornewdevices,and

thefourLEDswill beon&offevery0.5sinturn.It’llconnectwiththepreviousconnecteddeviceafter30s,

andthefourLEDswi llbeon&offevery0.5sinturn.

z WhenpressandholdForceConnectionbuttonabove5s;Firstly,the1

&3

LEDswillbeonfor1s;Secondly,

the2

&4

LEDswillbeonforanother1s;Third ly,thegamepadwillremovethepairingrecords,andsearch

fornewdevices,andfinallythefourLEDswillbeon&offevery0.5sinturn.

NOTE:WhenpressForceConnectionbutton,theLEDwillnoton)

z Click “SteelSeries Android XL”

in “Devices—Bluetooth settings—Bluetooth devices” to connect with the

device

z ThefourLEDswillbeonfor0.04s,andofffor2stoindicateconnectionsucceed

Note:Thegamepadsequencewillbeassignedbythegamesoftwar e



Reconnection 



z If the gamepad is connectedwith the device before,they’ll be reconnectedautomatically severalseconds

whenpoweronagain(it’lldisplaythebatterycapacityfor3sfirst)



FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 1

5 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resid

ential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used i

n accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfer

ence to radio or television reception, which can be determined by turning the equipment off and on, the user is enc

ouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This de

vice may not cause harmful interference, and (2) This device must accept any interference received, including inte

rference that may cause undesired operation.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications

to this equipment. Such modifications could void the user’s authority to operate this equipment.