User Guide

98
SETUP
CONNECTING VIA 2.4 GHZ WIRELESS
1 Connect the Aerox 5 USB Type-C Wireless Dongle (15) to an
available USB port on your device.
2 Toggle the Wireless Mode Switch (7) to the “2.4 GHz” position.
3 The Mouse and USB Type-C Wireless Dongle (15) will automatically
pair.
4 To further customize your Mouse, or re-pair a Wireless Dongle,
download the SteelSeries Engine software from steelseries.com/
engine
PAIRING VIA BLUETOOTH
1 Initiate Bluetooth pairing mode on your Bluetooth 5.0 or higher
enabled device.
2 Hold the CPI Button (4) and toggle the Wireless Mode Switch (7)
to the Bluetooth
position to turn on your Mouse.
3 The Mouse lighting will start blinking blue when searching for a
connection.
4 Select “Aerox 5 Wireless” on your Bluetooth-enabled device.
More detailed product information at
steelseries.com/aerox-5-wireless
BATTERY LEVEL INDICATOR
During use, the mouse will ash red when 5 % or less battery remains.
When turning on or waking from sleep, the mouse will ash a color to
indicate remaining battery level:
Red 0–5 % battery
Yellow 6–10 % battery
Green 11–100 % battery
When charging, the lighting will ash green for 5 seconds before resuming
default lighting.
DEFAULT CPI
Aerox 5 Wireless comes with 5 preset CPI settings that can be selected
using the CPI Button (4) on the top of the mouse. Each setting has its
own lighting indicator for ease of selection.
Step CPI Indicator Color
#1 400 Purple
#2 800 Blue
#3 1200 Green
#4 2400 Yellow
#5 3200 Red