User's Manual

7
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
1. Alarm Mode Armed:
Press button
on the remote, the control unit will receive the alarm mode signal from the
remote. The indicators will flash once and the siren will beeper. Then all the doors will lock,
the system will be armed in 3 seconds in alarm mode.
In alarm armed status, the first impact to vehicle will trigger the alarm. The control unit will
receive the impacted signal from the shock sensor and transfer the signal to siren and
indicators. Then the siren will chirp for 5 seconds, the indicators will flash.
The second impact in 15 seconds after the first impact will trigger the alarm again. The
control unit will receive the impact signal from the shock sensor and transfer the signal to
siren, indicators and engine. Then the siren will chirp for 30 seconds, the indicators will
flash, and the engine will be immobilized.
If there is no continuous impact to the vehicle, the alarm status will last for 30 seconds, and
then will return to alarm armed status.