User's Manual

11
When the power wire is cut off, the control unit will preserve the status and when the power is
supplied the system will return to the former status in 5 seconds.
12. Override reset switch
In the event the remote is lost or inoperative, the system can be disarmed by override reset switch:
• Enter the vehicle and turn the key to Acc position. The siren will chirp sharply.
• Press the foot brake and press override reset switch 5 times continuously. The LED light will turn
on.
The alarm will stop sounding and enter the disarm mode. You can now start and operate the vehicle
normally. press
the to recover the system.(It is highly recommended to hide this override switch
in a position only known to you.
13. LED memory of attacking degree
Normal status : two continuous LED blinks of three intervals
Attacked : four continuous LED blinks of three intervals
Door has been opened : blink continuously
14. Disable the former remote
Press the learning button in the control box for 10 seconds to cancel the former remotes.
15. Code learning