Use and Care Manual

ST1010 6" Jointer (Mfd. Since 3/16)
-39-
Setting Fence Stops
Figure 63. Adjusting fence 45˚ inward.
The fence stops are adjustable nuts and bolts that
simplify the task of adjusting the fence to 45˚ inward,
90˚, and 45˚ outward (135˚).
To set the 45˚ inward fence stop:
1. Using a 45˚ square, adjust the fence to the 45˚
inward position, as shown in Figure 63.
Figure 65. 90˚ swing stop engaged.
Jam Nut
90˚Swing
Stop
90˚ Fence
Stop Bolt
Figure 64. 45˚ inward fence stop jam nut.
Jam Nut
45˚ Inward Fence
Stop Bolt
45˚ Outward
Fence Stop Bolt
2. Loosen the jam nut shown in Figure 64.
3. Adjust the 45˚ inward fence stop bolt until it
makes contact with the back of the fence.
4. Retighten the jam nut loosened in Step 2 and
recheck.
To set the 90˚ fence stop:
1. Flip the 90˚ swing stop into the position shown
in Figure 65.
2. Using a 90˚ square, adjust the fence to the 90˚
position in Figure 66 using the fence stop bolt
and jam nut.
Figure 66. Adjusting fence to 90˚.
Square
3. Loosen the jam nut on the 90˚ fence stop bolt
(Figure 65).
4. Adjust the 90˚ fence stop bolt until it makes con-
tact with the 90˚ swing stop.
5. Retighten the jam nut loosened in Step 3 and
recheck.