Use and Care Manual

-12-
ST1010 6" Jointer (Mfd. Since 3/16)
SETUP
The following are needed to complete the setup pro-
cess, but are not included with your machine.
Description Qty
• Straightedge 4' (or longer) ...................................... 1
• Safety Glasses (for each person) ........................... 1
• Dust Collection System (optional) ........................ 1
• 4" Dust Hose (optional) ............................................ 1
• 4" Hose Clamp (optional) ......................................... 1
• Phillips Head Screwdriver #2 .................................. 1
• Wrench 13mm ............................................................. 1
• Wrench 17mm ............................................................. 1
• Wrench 19mm ............................................................. 1
• Socket Wrench 17mm ............................................... 1
• Level ................................................................................. 1
Items Needed for
Setup
The following items are needed, but not included, to
set up your machine.
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
This planer was carefully packed when it left our
warehouse. If you discover the machine is damaged
after you have signed for delivery, please immediately
call Customer Service at [phone] for advice.
Save the containers and all packing materials for pos-
sible inspection by the carrier or its agent. Otherwise,
filing a freight claim can be difficult.
When you are completely satisfied with the condition
of your shipment, you should inventory the contents.
Unpacking
SUFFOCATION HAZARD!
Immediately discard all plas-
tic bags and packing materi-
als to eliminate choking/suf-
focation hazards for children
and animals.
UNPLUG-power cord before
you do any assembly or
adjustment tasks! Otherwise,
serious personal injury to
you or others may occur!.